China Custom Cema Standard Impact Roller Carrier Conveyor Idlers for Coal Mine Cement

Product Description

XinRiSheng Carrier conveyor rollers are used to support and shape the conveyor belt. Conveyor carrier rollers can be fitted to the load side of the belt in: trough, tracking and transition frames, or fitted to the return side of the belt.

Diameter Φ89, Φ102, Φφ108, Φ114, Φ127, Φ133, Φ139, Φ152, Φ159, Φ165,  Φ194
Length 145mm-2800mm
Shaft A3 and 45# steel
Shell Q235(GB), Q345(GB), welded with DIN2394 standed
Bearing 6204/6205/6305/6206/6306/6307/6308/6309/6310
Working Life More than 30000hours
Advantages Low resistance, waterproof, dustproof  etc.

XinRiSheng Brand Conveyor features:
1. XinRiSheng in desiging conveyor rollers combines the requirements of high quality and labyrinth seal.
2.Roller Shell : consist of a selection steel tube,machined at either to strict tolerance.
3.Bearing house : Formed from strip deep pressed and calibrated to ISO M7.this tolerance allowing a perfect match between the bearing and the relevant parts on the sealing.
4. The roller shell and the 2 bearing housings are welded together in an way that forms a monolithic structure of exceptional strength. This method guarantees the maximum precision and the minimum out of balance forces in the rollers.
5. Seal : XinRiSheng Triple Labyrinth Seal design is grease filled and offers an additional level of protection from contaminants impacting the bearing CEMA C, D and E Idlers have sealed for life ball bearings.
6.Wide range of working temperatures from 0º C to 100º C.
7.Final Testing: Dimension,surface, Radial circular runout,Rotational resistance,Axial load,Water immersion seal,Axial displacement,Drop test.

XinRiSheng Brand Conveyor Rollers Production Process:
XinRiSheng Brand Conveyor Roller Advantage:

  1. Triple Labyrinth Seal
  2. Sealed for life ball bearings
  3. Extremely low rolling resistance
  4. CEMA C & D standard product line
  5. Idler end welding
  6. Solid steel shaft
  7. gauge steel shell/cover

Impact Roller Idlers:
Impact rollers are used as carrying rollers instead of normal steel rollers at a loading point. On steel roller there are rubber rings assembled, side by side, to absorb the weight and impact of material falling CHINAMFG the belt. At the same time impact rollers reduce the shock and vibration through the steel structure.

Specification of Impact Conveyor Roller Idlers:

Diameter(mm) Shaft Diameter Bearing Part No. Min Bearing Dynamic
Loading Pating(N)
127mm 25mm 6205 14000N
133mm 25mm 6205 14000N
152mm 25mm 6205 14000N
159mm 25mm 6205 14000N
127mm 25mm 6305 22500N
133mm 25mm 6305 22500
152mm 25mm 6305 22500N
159mm 25mm 6305 22500N
152mm 30mm 6306 28100N
178mm 30mm 6306 28100N
178mm 35mm 6307 33200N
203mm 35mm 6307 33200N
178mm 40mm 6308 41000N
203mm 40mm 6308 41000N
203mm 45mm 6309 52700N
203mm 50mm 6310 61800N
250mm 60mm 6312 81900N

Steel Spiral Return Roller Idler
The steel spiral return idler are used as support for the return side of belt. Used where sticky, corrosive, or CHINAMFG materials are present. Not only cleans itself, but keeps the belt cleans and double spiral configuration minimizes belt training problems such as misalignment.

Specification of steel spiral rubber idler:

Diameter Length Bearing Model Shaft Diameter
89mm 950mm 6204 20mm
108mm 950mm 6205 25mm
108mm 1150mm 6205 25mm
108mm 1400mm 6205 25mm
108mm 1600mm 6205 25mm
133mm 950mm 6305 25mm
133mm 1150mm 6305 25mm
133mm 1400mm 6305 25mm
133mm 1600mm 6305 25mm
159mm 1150mm 6306 30mm
159mm 1400mm 6306 30mm
159mm 1600mm 6306 30mm

Rubber Disc Return Roller Idler
Disc Return Rollers are used where the material has the potential to collect on the surface of the rollers which could ultimately lead to premature failure. The Ring minimises material build up on the roller shell. To maximise longevity, routine cleaning should still be observed. Rings come in rubber as standard.

  Ring Size(mm)
   
76.1mm 108mm,133mm,159mm
88.9mm 133mm,150mm,159mm,180mm,270mm,3Tube(mm)30mm
108mm 159mm,180mm,195mm,219mm

HDPE roller for mining and aggressive applications.
HDPE contains carbon black increasing ultra violet resistance. Steel and HDPE tube combination provides significantly reduced weight. The bearing housing effectively locks the HDPE tube in position preventing movement along the steel tube.

Diameter(mm) Shell Wall(mm) Nominal Shaft Diameter(mm) Bearing Part No. Min Bearing Dynamic Load Rating(N)
127mm 3.5+6.5 20mm 6204 12700N
127mm 3.5+6.5 25mm 6205 14000N
152mm 4+6.5 25mm 6205 22500N
159mm 4+10 25mm 6205 22500N
127mm 3.5+6.5 25mm 6305 22500N
133mm 3.5+9.5 25mm 6305 22500N
152mm 4+6.5 25mm 6305 22500N
159mm 4+10 25mm 6305 22500N
127mm 3.5+6.5 30mm 6306 28100N
133mm 3.5+9.5 30mm 6306 28100N
152mm 4+6.5 30mm 6306 28100N
159mm 4+10 30mm 6306 28100N
178mm 4+6.5 30mm 6306 28100N
152mm 6+6.5 35mm 6307 33200N
159mm 6+10 35mm 6307 33200N
178mm 6+6.5 35mm 6307 33200N
152mm 6+6.5 40mm 6308 41000N
159mm 6+10 40mm 6308 41000N
178mm 6+6.5 40mm 6308 41000N
193mm 6+7.5 40mm 6308 41000N
219mm 6+13 40mm 6308 41000N
178mm 6+6.5 45mm 6309 52700N
193mm 6+7.5 45mm 6309 52700N
193mm 6+7.5 45mm 6309 52700N
193mm 6+7.5 50mm 6310 61800N

Self Aligning Training Roller Idelers:
The Friction self aligning conveyor roller is used to adjust the belt deviation. Friction friction self-adjusting conveyor roller has great ability to protect conveyor belt from damage and running offline.

Friction self -aligning conveyor rollers specifications:

Diameter(mm) 89.7-193.7mm
Length(mm) 500-1400(Total Length:674-1630)
Shell Thickness(mm) 3.2-4.5
Standard DIN,CEMA,JIS,AS,SANS-SABS,GOST,AFNOR etc.

Nylon Rollers and Idlers:
The Nylon Roller Idler is light in weight and easy to install in the air. The nylon wheel has been widely used as a tower crane accessory in various lifting equipment, and gradually replaces the normal metal pulley with its great advantages. 

Shell Diameter Shaft Diameter  Bearing Series Material
89mm 17mm/20mm 6204 Cast Nylon PA6,PA66
102mm 20mm/25mm 6204/6205 Cast Nylon PA6,PA66
108mm 20mm/25mm 6204/6205 Cast Nylon PA6,PA66
114mm 20mm/25mm 6204/6205 Cast Nylon PA6,PA66
127mm 20mm/25mm.30mm 6204/6571/6206 Cast Nylon PA6,PA66
133mm 20mm/25mm/30mm 6204/6571/6206 Cast Nylon PA6,PA66
140mm 20mm/25mm/30mm 6205/6305/6206 Cast Nylon PA6,PA66
152mm 25mm/30mm/35mm 6305/6206/6306/6207 Cast Nylon PA6,PA66
159mm 30mm/35mm/40mm 6306/6207/6308 Cast Nylon PA6,PA66
165mm 35mm/40mm/45mm 6206/6306/6207/6308 Cast Nylon PA6,PA66

All kinds  of rollers, idlers, pulleys, rubber belts,belt conveyors can be provided:

Why Choose XinRiSheng Brand Conveyor Rollers:
XinRiSheng conveyor rollers are built to last and designed for medium to extreme heavy duty requirements for various industries. Applications include: steel proecess,quarrying,cement,coal,chemical plant and recycling industries. All rollers are suitable for continuous operation in the most extreme weather conditions and hostile environments. XinRiSheng Conveyor Rollers are designed for endurance and components originate from quality sources. Balancing determines a roller's life, which is ensured by using concentric pipes, precision end-caps and double-bored spindles and Triple Labyrinth Seal. Rolling resistance determines the power requirements for a conveyor, which is why XinRiSheng conveyor rollers are lubricated for life and double sealed to resist dust permeation.
  /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Material: Steel
Application: Chemical Industry, Grain Transportation, Mining Transport, Power Plant, Coal,Cement,Steel,Quarry Site, Port, Bulk Material
Structure: Ordinary Roller
Samples:
US$ 12/Piece
1 Piece(Min.Order)

|

Order Sample

Customization:
Available

|

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

ratchet wheel

What maintenance practices are recommended for ratchet wheels to ensure optimal functionality?

Maintaining ratchet wheels is essential to ensure their optimal functionality and longevity in mechanical systems. Here are recommended maintenance practices for ratchet wheels:

  • 1. Regular Inspection: Perform routine visual inspections of the ratchet wheel and the surrounding components. Look for signs of wear, damage, or deformation. Pay attention to the teeth, as worn or damaged teeth can affect engagement.
  • 2. Cleaning: Keep the ratchet wheel and associated components clean from dirt, debris, and contaminants. Clean with a suitable solvent or degreaser to remove built-up grime and ensure smooth operation.
  • 3. Lubrication: Apply a suitable lubricant to the ratchet wheel and pawl or catch mechanism to reduce friction and prevent premature wear. Follow the manufacturer's recommendations for lubrication intervals and types of lubricants.
  • 4. Pawl or Catch Inspection: Check the pawl or catch mechanism that engages with the ratchet wheel. Ensure it is in good condition, and there is no excessive wear or damage. Replace worn or damaged pawls promptly.
  • 5. Alignment: Verify that the ratchet wheel is correctly aligned with the pawl or catch. Misalignment can lead to uneven wear and reduced effectiveness. Make any necessary adjustments to ensure proper engagement.
  • 6. Tightening Fasteners: Periodically check and tighten any fasteners, such as bolts and nuts, that secure the ratchet wheel and its associated components. Loose fasteners can lead to play and affect performance.
  • 7. Teeth Replacement: If teeth on the ratchet wheel show signs of significant wear or damage, consider replacing the ratchet wheel or the affected teeth. Damaged teeth can lead to unreliable engagement.
  • 8. Corrosion Prevention: In corrosive environments, take measures to prevent rust or corrosion on the ratchet wheel. This may include applying protective coatings or using corrosion-resistant materials.
  • 9. Calibration (If Applicable): In applications requiring precise control, consider calibrating the ratchet wheel to ensure it provides the desired incremental movement accurately.
  • 10. Safety Check: Ensure that ratchet wheels in safety-critical applications are functioning correctly and have not been compromised in any way. This includes systems in vehicles, safety equipment, and emergency mechanisms.
  • 11. Replacement: As ratchet wheels age and show significant wear, it's advisable to replace them to maintain the reliability and safety of the system.

Regular maintenance and inspection of ratchet wheels are essential to prevent unexpected failures, ensure proper engagement, and extend their service life. Following these maintenance practices helps maintain the optimal functionality and reliability of ratchet wheels in mechanical systems.

ratchet wheel

Can you share tips for selecting the right ratchet wheel based on specific industry requirements and load capacities?

Selecting the right ratchet wheel for your application involves considering industry-specific requirements and load capacities. Here are some tips to help you make an informed choice:

  • 1. Determine Load Capacity: Identify the maximum load or torque that your ratchet wheel needs to handle. Choose a ratchet wheel with a load capacity that comfortably exceeds your application's requirements to ensure safety and reliability.
  • 2. Material Selection: Consider the environment in which the ratchet wheel will operate. Stainless steel or corrosion-resistant materials are ideal for outdoor or harsh conditions, while plastic ratchet wheels may be suitable for lighter-duty applications.
  • 3. Tooth Profile and Design: The tooth profile and design of the ratchet wheel should match your specific application. For precise control, choose a ratchet wheel with well-designed teeth that engage smoothly with the pawl or catch.
  • 4. Precision and Tolerance: In applications where precision matters, opt for ratchet wheels with tight tolerances. High-precision ratchet wheels provide consistent and reliable performance.
  • 5. Pawl Compatibility: Ensure that the chosen ratchet wheel is compatible with the pawl or catch mechanism in your system. Proper engagement is essential for reliable operation.
  • 6. Surface Finish: A polished or treated surface can reduce friction, extending the ratchet wheel's service life. Consider surface finish options to enhance performance.
  • 7. Environmental Factors: Evaluate the environmental conditions, including temperature, moisture, and exposure to chemicals. Choose a ratchet wheel that can withstand these conditions without compromising performance.
  • 8. Maintenance Requirements: Understand the maintenance needs of the ratchet wheel. Some may require periodic lubrication or inspection, while others are maintenance-free. Choose one that aligns with your maintenance capabilities and schedule.
  • 9. Compliance with Standards: Ensure that the ratchet wheel complies with industry standards and regulations relevant to your application. Compliance is critical for safety and reliability.
  • 10. Cost-Benefit Analysis: Consider the long-term cost-effectiveness of your choice. While high-quality ratchet wheels may have a higher initial cost, they often offer better reliability and reduced maintenance expenses over time.
  • 11. Application-Specific Features: Some ratchet wheels come with features tailored to specific applications, such as noise reduction or enhanced security. Explore these options if they align with your needs.
  • 12. Seek Expert Advice: If you're unsure about the best ratchet wheel for your application, consult with industry experts or suppliers. They can provide valuable insights and recommendations based on their experience.

By considering these tips and tailoring your ratchet wheel selection to your industry requirements and load capacities, you can ensure that your mechanical system operates reliably and efficiently.

ratchet wheel

How does the design of a ratchet wheel contribute to its efficiency and reliability?

The design of a ratchet wheel is critical to its efficiency and reliability in various applications. The following design elements contribute to the effectiveness of ratchet wheels:

  • 1. Tooth Profile: The shape and profile of the teeth on a ratchet wheel are crucial. Teeth are typically angled to allow easy engagement with the pawl or catch mechanism when force is applied in the desired direction. The angle of the teeth ensures efficient and secure movement in one direction while preventing backward motion.
  • 2. Material Selection: The choice of materials for the ratchet wheel affects its durability and reliability. Ratchet wheels are commonly made of strong and wear-resistant materials such as hardened steel or alloy metals. High-quality materials ensure the wheel can withstand the forces and wear associated with its intended application.
  • 3. Tooth Size and Spacing: The size and spacing of the teeth on a ratchet wheel are designed to optimize performance. Smaller teeth allow for finer control and incremental movement, while larger teeth provide stronger engagement for heavier loads. Proper tooth spacing ensures smooth and reliable operation.
  • 4. Pawl Design: The design of the pawl or catch mechanism that engages with the ratchet wheel is equally important. The pawl should have a pointed end that effectively grips the teeth when engaged. It should also release easily when force is applied in the opposite direction to allow smooth and reliable operation.
  • 5. Lubrication and Maintenance: Adequate lubrication of the ratchet wheel and pawl is essential for reducing friction and wear. Regular maintenance, including cleaning and re-lubrication, ensures the efficient functioning of the ratchet mechanism over time.
  • 6. Load Capacity: The design of the ratchet wheel must align with the intended load capacity of the application. Heavier loads may require larger and more robust ratchet wheel designs with deeper teeth to withstand greater forces without slipping.
  • 7. Durability and Corrosion Resistance: In applications where exposure to harsh environments or moisture is a concern, ratchet wheels may incorporate coatings or materials that enhance corrosion resistance. This contributes to their long-term reliability.

The combination of these design considerations ensures that a ratchet wheel can efficiently transmit motion in one direction while effectively locking to prevent reverse movement. Proper design contributes to the overall efficiency, reliability, and safety of mechanical systems and tools that rely on ratchet mechanisms.

China Custom Cema Standard Impact Roller Carrier Conveyor Idlers for Coal Mine Cement  China Custom Cema Standard Impact Roller Carrier Conveyor Idlers for Coal Mine Cement
editor by Dream 2024-05-02