China high quality 500 mm 30 Degree Galvanized Conveyor Roller Frame Idler Brackets near me manufacturer

Product Description

Product Description

Roller is an important component of belt conveyor.It has many kinds and large quantity,can support conveyor belt and material weight.

 

 Product Specification
 Model NO.  Steel roller
 Diameter  89-159mm
 Length  190-1500mm
 Material  Carbon steel
 Seal  Multiple labyrinth seal
 Bearing type  Deep Grove ball bearing
 Gurantee  12 months
 Color  Customized
 Certificate  ISO,CE
 Advantages  waterproof,dustproof,smooth running,no noise,rotational resistance, axial float, shaft radial play

 

Features:

A) Bearing: deep groove ball and double sealing bearing 2RZ and 2Z with C3 clearance;

B) Sealing: multi-stage labyrinth seals achieve waterproof and dust proof 

C) Lubrication: Grease is Lithium soap type grease with Rust Inhibitors, grease is permanent lubricant.

D) Color: roller surface could be painted any color as per customer request.

E) Each roller would be through strict inspection and test to ensure every out coming roller is of true high quality;

Detailed Photos

1. Seal assembly
The seal assembly of idler is made of nylon, and the structural from is non-contact labyrinth seal structure.
The inner and outer seals from a labyrinth passage with high precision, and the passage is filled with long-acting lithium-based grease, so that the idler has good waterproof and dustproof performance.

2. Bearing
The bearing of Idler adopts special C3 clearance grade deep groove ball bearing.
Before assembly, the bearing of idler has been filled with lithium base grease and sealed permanently on both sides, which can realize lifetime maintenance free and extend the service life of the bearing.

3. Shaft
The shaft of idler adopts high precision cold drawn round steel after quenching and tempering treatment. Advanced Chamfer milling machine is used to perform accurate machining at both ends of the shaft, so as to ensure that the axial displacement of the idler is almost zero.

4. Bearing housing
The fabrication of the bearing housing consists of a multi-stage precision automatic pressing operation, which ensure high accuracy of bearing and sealing position.
The idler pipes and bearing housing at both ends are 3mm fully fillet welded at the same time trough CO2 gas shield double-gun automatic welding machine, which gives a minimum of 70% weld penetration,and ensures that the idler even under the high load and high speed operation, still strong and durable.

5. Shell
The shell of idler adopts special ratio-frequency welded pipe with small bending degree and small ellipticity.
The advanced steel tube chamfer cutting off tool machine is used for predsemachining of both ends of pipe, which can effectively guarantee the concentricity of idlers and minimize the rotation resistance of idlers
 

Product Parameters

Technology Specification
D d

Bearing

Model

L b h f

Weight

(kg)

D d

Bearing

Model

L b h f

Weight

(kg)

89 20 4G204 200 14 6 14 2.79   133 25 4G205 380 18 8 17 7.84
250 2.98 465 9.24
315 3.58 600 11.48
465 5.24 700 13.44
600 6.48 1150 20.6
750 7.87 1400 24.61
950 9.72 4G305 380 8.21
25 4G205 8 18 17 11.21 465 9.62
108 20 4G204 315 14 6 14 4.46 530 10.7
465 6.07 600 11.86
950 11.27 700 13.51
25 4G205 315 18 8 17 5.07 800 15.17
380 5.86 1150 20.97
465 6.89 1400 24.99
600 8.53 1600 28.44
700 9.74 30 4G306 465 11.34
950 12.77 530 12.54
1150 13.99 800 17.48
1400 15.62 1400 26.75
4G305 380 6.23 1600 31.38
465 7.26 159 25 4G205 465 11.58
530 8.05 700 16.52
600 8.9 1400 31.09
700 10.11 4G305 465 12.02
800 11.32 530 13.84
950 13.14 700 16.95
1150 15.57 800 19.06
1400 18.47 1400 31.52
1600 21.02 1600 35.85
30 4G306 465 22 8.57 30 4G306 465 22 13.76
530 9.47 530 15.23
800 13.2 800 21.36
1400 21.49 1400 34.98
1600 24.26 1600 39.51

  Quality design and build

  Our focus on quality starts with sourcing only the best raw materials, rejecting anything that falls outside our strict tolerances.During manufacture your order is checked at each stage before passing through to the next process. This also contributes to our ability to meet orders on time.
 

Packaging & Shipping

Company Profile

 

FAQ

 

Q: Are you a factory or trading company?

A: We are a factory and have export license. Besides, our factory has a number of product lines to provide products with stable production capacity for customers in delivery time.

 

Q: What information shall I provide in order to confirm the conveyor carrying rollers order?

A: We work with technical drawings for any non-standard products. If the order is for standard parts, you only have to provide us with the part number so we may define the parts of the order.

 

Q: How does your factory do regarding to quality control?
A: Quality is priority. We always attach great importance to quality control from beginning to the end of the
production. Every batch rollers will be carefully inspected before it's packed for shipment.

 

Q: Do you have the products in stock?
A: No. All rollers are produced according to your order.

 

Q: Can I order a sample?
A: Of course. We can offer regular model roller sample for free, but the freight cost shall be borne by your side. If you want
customized model sample, we'd like you to bear the charge for sample and freight.

Q:Hong long is your delivery time?
A:Normally 7-30 days ,it depends on your quantity.For Decent order , we have flexible adjustment to ensure the delivery time.

If you do not see the question you are looking for, please contact us for further assistance.

Contact Person: Lisa Lee
 
 

What Is a V-Belt?

A v-belt is a type of belt that provides a continuous motion to the vehicle's wheels. This type of belt is made of several different components. They usually have a trapezium-shaped cross-section because of its elastomer core. Elastomers are often made of polyurethane or a synthetic rubber with good shock resistance. Sometimes, a v-belt will have 2 sections - cushion rubber and compression rubber.
belt

Link-type V-belt

A laminated link-type V-belt is 1 embodiment of the present invention. The belt comprises individual lamina sections connected longitudinally by studs and tubes, each of which has at least 1 connecting means. The slots in the links allow for a full share of the load to be transferred through the belt, and they also reduce substantially all internal mechanical stresses. The belt is preferably designed to extend substantially the entire width of the machine being driven.
Conventional link-type V-belts are installed between 2 pulleys on the tight side of the V-drive. A wide end of a link moves in the direction of rotation, while the stud of a second, smaller link pulls the nose end of the third link forward. The shank of the stud pivots on a solid fabric located in hole 2 of the third link below. The bottom link, however, curls over the stud and the belt is assembled.
The present invention offers an improved method of forming a link-type V-belt. The belt is manufactured using links and does not have to be fitted as tightly as conventional link-type V-belts. This belt is flexible and strong enough to handle normal tension loads in a well-designed drive. In addition, the belts made using the present invention will have a longer life, thereby extending the drive's load-carrying capacity.

Classical V-belt

A classical trapezoidal belt profile makes the VB Classical V-belt ideal for various industrial applications. Available in small sizes from 5mm to 3mm, these belts are available with cogged or raw edges. Their highly engineered construction makes them ideal for a variety of uses. These belts are commonly used in motors, compressors, milling machines, mixers, and other mechanical devices. To determine the right belt for your application, consider the following factors.
The classic v-belt is the most common and economically-priced type of v-belt. They are manufactured using special formulated rubber reinforced with polyester cords. These belts can span from 16 inches to 400 inches in length. The classic V-belt is also very easy to replace. The belt's outer diameter and pitch can be measured. The length is typically standardized by the Association for Rubber Product Manufacturers.
Typically, classical V-belts are used in single-belt drives. Because they don't require lubrication or maintenance, these belts are often available in sizes A and B. However, larger belt sizes are rarely used for single-belt drives. In such cases, multiple A or B belts are an economical alternative to single-belt C. In addition, narrower-profile V-belts provide higher power ratings than conventional V-belts because of their higher depth-to-width ratio. These belts are ideal for heavy-duty applications.
belt

Narrow V-belt

The narrow v-belt is the same as a conventional v-belt, but it has a smaller top and bottom width. This makes it suitable for higher horsepower applications, and it is used in high-end sports cars. Narrow v-belts are generally characterized by a letter "v" on the top side and a length of outside dimensions of 1.6:1.
The steel wires that comprise the core of the v-belt are endless and are free of joints. This provides the strength required for torque transmission. A base rubber compound is placed around the steel wire and acts as a medium of compression and shock absorption during power transmission. A plastic layer acts as a protective cover, and provides the rubber with a degree of temperature tolerance. While choosing a narrow v-belt, it is important to keep in mind that there are some disadvantages to a narrow V-belt.
For example, a narrow V-belt is suitable for high-power applications, and may be used in a small assembly space. Its narrow profile also allows it to be space-saving in layout and allows high-speed drives without additional belts. Furthermore, it reduces operating and maintenance costs. It is ideal for applications where space is limited, and a high torque is required. The benefits of a narrow V-belt are plentiful.

Banded belt

Identifying a banded v-belt can be tricky, but there are a few signs that can indicate a possible problem. Cracked belts can be difficult to spot, but they can be an early indicator of a more serious problem. Look for cracked underside edges, worn covers, and misplaced slack. If 1 or more of these factors applies to your belt, you may want to seek a replacement.
Banded v-belts are made with an elastomer core. The main component of this belt is the elastomer, which is used for the band's flexural strength and shock resistance. It's sometimes separated into 2 sections, with each section connected to the other by a tension cord. This gives the belt its trapezium cross-section, which increases tensile strength.
The 2 main types of banded v-belts are wrapped or raw edge. Wrapped v-belts have a fiber-covered body while raw edge belts are uncovered. Banded v-belts are often classified by their cross-section, and include: standard v-belt, wedge v-belt, narrow versus double v-belt, cogged v-belt, and double t-belt.
Banded v-belts are popular with commercial applications. Whether you're looking for a 2V-belt or a large 8V-belt, V-Belt Guys has what you need. We also stock a wide variety of different banded v-belts and can help you find 1 that fits your needs and budget. Take a look at our selection today!

Traditional V-belt

Although a traditional V-belt may be a glorified rubber band, modern variations reflect advances in engineering. Proper installation and maintenance are essential for trouble-free service. When you are replacing a traditional V-belt, be sure to follow these simple steps to ensure its longevity. Read on to learn more. Listed below are the features of each type of V-belt. Identify the type of belt you need by measuring its top width, circumference, and dimensions.
TEC Traditional V-belts have an exceptionally low slip rate and are resistant to high operating temperatures. These types of belts do not experience early belt aging. They are also highly resistant to poor operating conditions. However, the maintenance is more extensive than other types of belts. A typical V-belt part number is B50, which is the cross-section size of a 50-inch belt. The belt's lifespan is greatly increased because of this feature.
A ribbed V-belt is another option. It has a deeper V than a traditional V-belt. The ribs in this type are narrower and more flexible. These ribs are smaller than the classic V-belt, but they can transmit 3 times as much horsepower. Because they are thinner, these belts are more flexible than traditional V-belts. The thickness of the ribs is less critical.
belt

Metric V-belt

Metric V-belts are made to a more precise standard than their American counterparts. These belts are manufactured to meet ARPM tolerances, making them suitable for industrial, machine, and food processing applications. This metric system is also more convenient than converting between the 2 units. Listed below are the most common uses for a Metric V-belt. If you're in the market for a new belt, consider ordering a metric one.Metric V-belts are made to a more precise standard than their American counterparts. These belts are manufactured to meet ARPM tolerances, making them suitable for industrial, machine, and food processing applications. This metric system is also more convenient than converting between the 2 units. Listed below are the most common uses for a Metric V-belt. If you're in the market for a new belt, consider ordering a metric one.
Metric V-belts are generally more durable than their equivalents made of standard American-sized belts. Metric V-belts are available in many different sizes to fit different machineries. In addition to offering superior load-carrying capacity, Metric Power(tm) V-belts are known for their exceptional flex and stretch characteristics. For optimum performance in textile mills, food processing, and machine tool applications, Metric Power(tm) V-belts are manufactured using a proprietary construction that combines a higher load-carrying capacity with superior flex and stretch.
Metric belts can generate 50% to 100% more horsepower than conventional and classic sectioned belts. This is achieved through improved construction and placement of the cord line. These belts also have unique wedge designs that help them support the cord in motion. However, you must ensure the proper tension when buying a Metric V-belt, because improper tension may damage the belt. They are compatible with both U.S. and international standards.

China high quality 500 mm 30 Degree Galvanized Conveyor Roller Frame Idler Brackets     near me manufacturer China high quality 500 mm 30 Degree Galvanized Conveyor Roller Frame Idler Brackets     near me manufacturer