China supplier UHMWPE HDPE Carbon Stainless Rubber PU Polyurethane Conveyror Polymer Roller Conveyor Idler

Product Description

HDPE conveyor rollers,conveyor drums,conveyor pulleys,Belt conveyor rollers,drive pulleys wheels,Galvanized customized rollers for Mine/Port/Cement/Concrete/Power Plant

Advantages and Benefits:

1, Lower weight-50% lighter than steel roller which means lower power consumption
2, Easier to install and maintenance,  Easier /cheaper  transportation.
3, The most important is that it reduces the cost of conveyor roller.
4, Lower abrasion and corrosion of roller shell which means longer life of roller and lower maintenance.
5, High resistance to chemical agents which means the roller will not rust and is suitable for a wide variety of applications.Belt friendly since HDPE shell will not wear and cut the belt.
6, Low noise emission due to thermoplastic noise absorption.
7, Self -cleaning roller surface which means prevention of build up of material which main cause of belt mis-tracking and less spillage from the belt.
8, Low running resistance sealing system which means lower motor torque need in conveyor start , lower power size and energy consumption. 

Properties comparisons of HDPE pipe, PA66 pipe and steel pipe.
 

Item Test method Unit HDPE pipe PA66 pipe Steel pipe
Density ISO1183 g/cm3 0.945 1.15 7.8
Melting temperature ISO11357 °C 129 255 1410
Water absorption ISO11359 % <0.01 3.8 -
Coefficient of linear thermal expansion ISO11359 10-4/°C 1.2 0.8 0.17
Heat deformation temperature ISO75 °C 71 182-224 1230
Yield strength ISO527 Mpa 20 - ≥245
Tensile elongation ISO527 % ≥350 60-300 20
Gap beam impact strength ISO179 KJ/m2 <27 5.9-10.8 No break
Rockwell hardness ISO2039 R 33 85-120 45
Friction coefficient ISO8295 - 0.28 0.37 0.58
Corrosion resistance - - Good Good Bad

 

Product Parameters

 

Technical Parameters
Standard Diameter Length scope ( mm) Bearings Type
(Min~Max)
Idler's Shell Wall Thickness
mm Inch
63.5 2 1/2 150~3500 204 3.0mm~3.75mm
76 3 150~3500 204 205 3.0mm~4.0mm
89 3 1/3 150~3500 204 205 3.0mm~4.0mm
102 4 150~3500 3.5mm~4.0mm
108 4 1/4 150~3500 3.5mm~4.0mm
114 4 1/2 150~3500 3.5mm~4.5mm
127 5 150~3500 3.5mm~4.5mm
133 5 1/4 150~3500 306 3.5mm~4.5mm
140 5 1/2 150~3500 306 3.5mm~4.5mm
152 6 150~3500 4.0mm~4.5mm
159 6 1/4 150~3500 4.0mm~4.5mm
165 6 1/2 150~3500 308 4.5mm~6.0mm
177.8 7 150~3500 309 4.5mm~6.0mm
190.7 7 1/2 150~3500 309 4.5mm~6.0mm
194 7 5/8 150~3500 310 4.5mm~6.0mm
219 8 5/8 150~3500 4.5mm~6.0mm

 
Typical applicatios:Mining---coal, iron ore,gold,Coal process plants,Coal fired power stations,Import/export terminals,Steel plants,Fertilizer plants,Cement plants,Gravel plants,Quarry.
 

Packaging & Shipping

 

 

  /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Material: HDPE
Surface Treatment: Lathe
Motor Type: No
Installation: Horizontal
Size: Customer-Made
Roller Length: 190mm to 3500mm
Customization:
Available

|

ratchet wheel

Can ratchet wheels be customized for specific uses or integrated into different systems?

Yes, ratchet wheels can be customized for specific uses and seamlessly integrated into various mechanical systems. Customization allows for tailoring ratchet wheels to meet the unique requirements of specific applications. Here are ways in which ratchet wheels can be customized and integrated:

  • 1. Custom Tooth Profile: Ratchet wheels can be designed with a specific tooth profile to match the desired level of control and movement. Custom tooth spacing and sizes can be created to achieve precise incremental motion or accommodate varying load capacities.
  • 2. Material Selection: Depending on the application's demands, ratchet wheels can be manufactured from different materials, including various types of metals such as steel, stainless steel, or alloys. Specialized coatings can also be applied for enhanced durability and corrosion resistance.
  • 3. Size and Diameter: The size and diameter of the ratchet wheel can be customized to fit within the available space of the mechanical system. This ensures a proper fit without clearance issues or interference with other components.
  • 4. Load Capacity: Custom ratchet wheels can be designed to handle specific load capacities, making them suitable for both light-duty and heavy-duty applications. Reinforced designs with larger teeth and diameters can support heavier loads.
  • 5. Pawl and Catch Mechanism: The design of the pawl or catch mechanism can be tailored to ensure optimal engagement and disengagement with the custom ratchet wheel. This customization ensures reliable operation in the intended application.
  • 6. Precision Requirements: For applications demanding precise control and adjustments, fine-tooth custom ratchet wheels can be created to provide finer incremental movement and enhanced accuracy.
  • 7. Regulatory Compliance: Custom ratchet wheels can be designed to meet specific industry standards and safety regulations, ensuring compliance with applicable requirements.
  • 8. Integration into Systems: Ratchet wheels can be seamlessly integrated into various systems, including hand tools, winches, tie-down mechanisms, conveyor systems, and more. Their unidirectional and locking capabilities make them valuable components in many applications.

Customized ratchet wheels are often used in specialized industries and applications where standard off-the-shelf components may not fully meet the unique demands. Manufacturers and engineers work closely to design and produce custom ratchet wheels that precisely match the specifications and requirements of the intended use, contributing to the efficiency and reliability of the mechanical systems they are part of.

ratchet wheel

Can you provide insights into the importance of proper installation and alignment of ratchet wheels?

The proper installation and alignment of ratchet wheels are of utmost importance for ensuring their functionality, longevity, and safety in mechanical systems. Here are key insights into why proper installation and alignment matter:

  • 1. Precision and Efficiency: Correct installation and alignment ensure that the ratchet wheel engages smoothly with the pawl or catch mechanism. Proper alignment minimizes friction and maximizes the efficiency of controlled motion, allowing for precise and repeatable adjustments.
  • 2. Preventing Premature Wear: Misaligned or improperly installed ratchet wheels can experience uneven wear on their teeth. This can lead to premature wear and decreased service life. Proper alignment distributes loads evenly, reducing the risk of wear and damage.
  • 3. Safety Considerations: In safety-critical applications, such as emergency stop systems, the alignment of ratchet wheels is vital. Misalignment can compromise the safety of these systems, leading to unintended operation or failure to engage when needed. Proper alignment ensures reliable safety mechanisms.
  • 4. Avoiding Slippage: Correct alignment ensures that the pawl or catch securely engages with the ratchet wheel's teeth. Improper alignment can result in slippage, where the wheel fails to hold its position or lock as intended. This can be hazardous in applications requiring stability and security.
  • 5. Reducing Maintenance Costs: Misaligned ratchet wheels are more likely to require frequent maintenance and replacement. Properly aligned ratchet wheels experience less wear and stress, leading to longer service intervals and reduced maintenance costs over time.
  • 6. Enhancing Durability: Well-aligned ratchet wheels are more durable and can withstand higher loads and forces. This durability is essential in applications where the ratchet wheel is subjected to heavy use or challenging conditions.
  • 7. Consistency in Operations: Properly installed and aligned ratchet wheels contribute to consistent and repeatable operations. Whether in manufacturing, assembly, or other tasks, consistency is critical for achieving desired outcomes and quality standards.
  • 8. Minimizing Vibration and Noise: Misalignment can lead to unwanted vibrations and noise in mechanical systems. Proper alignment reduces these disturbances, contributing to a quieter and smoother operation.
  • 9. Compliance with Specifications: Many industries have specific standards and regulations governing the installation and alignment of critical components like ratchet wheels. Proper alignment ensures compliance with these standards and ensures that the system operates as intended.

In summary, proper installation and alignment of ratchet wheels are essential for precision, efficiency, safety, and overall system performance. Investing time and care in the initial installation process pays off in terms of reliability, reduced maintenance, and improved safety in mechanical systems.

ratchet wheel

What are the different types and sizes of ratchet wheels available in the market?

Ratchet wheels come in various types and sizes to accommodate a wide range of applications. The choice of ratchet wheel type and size depends on factors such as load capacity, space constraints, and the specific requirements of the mechanical system. Here are some common types and sizes of ratchet wheels available in the market:

  • 1. Standard Ratchet Wheels: These are the most common type of ratchet wheels, featuring a set of angled teeth that engage with a pawl or catch mechanism. Standard ratchet wheels are available in a variety of sizes, typically ranging from small diameters (e.g., a few inches) to larger ones (e.g., a foot or more) to accommodate different applications.
  • 2. Fine-Tooth Ratchet Wheels: Fine-tooth ratchet wheels have smaller and more closely spaced teeth compared to standard ratchet wheels. This design allows for finer control and incremental movement in applications where precision is critical. Fine-tooth ratchet wheels are often used in instruments, delicate machinery, and applications requiring precise adjustments.
  • 3. Large Diameter Ratchet Wheels: In heavy-duty applications such as industrial machinery and material handling equipment, large diameter ratchet wheels are employed to handle substantial loads. These ratchet wheels can have diameters exceeding a foot or more, providing the necessary strength and engagement surface for robust performance.
  • 4. Miniature Ratchet Wheels: Miniature ratchet wheels are designed for compact and space-restricted applications. They are smaller in size, typically measuring fractions of an inch in diameter. These miniature ratchet wheels are commonly used in electronics, medical devices, and precision equipment.
  • 5. Custom Ratchet Wheels: For specialized applications or when off-the-shelf ratchet wheels do not meet specific requirements, custom ratchet wheels can be manufactured. Customization allows for tailoring the size, tooth profile, and material to suit unique applications and load capacities.
  • 6. Corrosion-Resistant Ratchet Wheels: In environments where corrosion is a concern, ratchet wheels may be available with special coatings or materials that enhance their resistance to rust and corrosion. These ratchet wheels are suitable for marine, outdoor, or humid conditions.

The availability of ratchet wheel types and sizes in the market ensures that industries and applications of all scales can find the appropriate ratchet wheel to meet their specific needs. Whether it's for heavy-duty machinery or precision instruments, ratchet wheels come in various configurations to support a wide range of mechanical systems.

China supplier UHMWPE HDPE Carbon Stainless Rubber PU Polyurethane Conveyror Polymer Roller Conveyor Idler  China supplier UHMWPE HDPE Carbon Stainless Rubber PU Polyurethane Conveyror Polymer Roller Conveyor Idler
editor by Dream 2024-04-22